How to Use Management Zones

Management Zones are defined as, similar agronomic areas in a field that are created from a combination of layers. These similar agronomic areas can be used to manage inputs and data to analyze better efficiency and return on investment to your farm.  At Premier Crop we offer a user-friendly way to bring these layers together in one platform and help you make confident decisions from your data.

Create Zones – How you create zones depends how you intend to use the zone once it is created. There are many valuable data layers, the more layers and confidence you have, the better the zone and more useful it will be. If you are new to data management and have not collected many data layers, a few simple layers such as soil test attributes, one to two years of yield data, and even a NDVI image can get you started. As you build data layers such as yield and soil fertility you can start defining management zones to be more accurate. The more history you have the more refined the management zone will be to give you more confidence for variable rate prescriptions such as planting and fertility.

get started with management zones

Using Management Zones –   Management zones have been the catalyst in creating yield synergy across hundreds of thousands of acres in our system. Yield synergy is defined as applying the right rate of multiple products to achieve a higher return in specific parts of the field, rather than applying more or less of one product at one rate on a whole field. Developing the right rates is calculated by incorporating your management zones into all of your prescriptions. Each zone will have a specific calculated rate per product to be applied based on its productivity. If we know that you have a high yield environment, we have proven with our replicated randomized trials, called Enhanced Learning Blocks, that we can increase fertility, population, and crop protection products in these areas to push that environment to a higher yield. We also have experienced in lower producing zones, not only a savings on input costs, but also yield increases due to less plant crowding with lower plant population and better use of fertility management. Now that is a huge win for your bottom line!

create yield profit from management zones

Analysis:  This is where Premier Crop is different because we analyze how your management zones and prescriptions performed. We prove if the products, population and rates were profitable. Management zones can have little value if you don’t have a good platform to analyze them.  Once you build your zones, Premier Crop can take a deep dive to understand how each zone is delivering value across your field and your farm. Our management zone reports can identify what variables are affecting yield and profitability, we prove if the rates worked. Premier Crop generates an easy-to-read report that shows what you did in each zone agronomically and how yield responded. We then break it down to see what the top correlating factors are in each zone to identify what we can continue to improve. Utilizing Premier Crop’s cost/bu analysis per zone helps you understand your field’s true ROI and prove that by increasing or decreasing input dollars in the right areas of the field can make you more margin.

corn cost per bushel by management zones

Management Zones can provide great value to your operation when created, implemented and analyzed correctly. Premier Crop Systems platform is built to meet any grower where they are to create management zones using their data.  Whether you have years of data, or a 60-year-old soil map, we can help you be more profitable. Don’t get stuck using a system that can’t provide analysis of its work or prove your results. Premier Crop Systems is proud to be your partner on your path to higher profits.

What Does a Year End Meeting Look Like with a Premier Crop Partner?

“We use SciMax Solutions, a Premier Crop partner,
to push everything we can
in order to get the best ROI
and try to do the best job that we can.”
– Mike Myers, Waukee, IA

PETER BIXEL: I’m Peter Bixel, SciMax Team Leader, and today we’re working with two of our clients, down here close to Des Moines, Iowa: Dale Meyer and Michael Myers. And I’ve been looking at their information, reviewing 2020 data this year and planning for 2021.

MIKE MYERS: I’ve been working with Peter and SciMax for, I think, around seven years, something like that. Time flies. I work with SciMax to help push us to the next level. It’s a really good precision ag database that they have, and adding VRT into our operation was a big part of that, using our yield data and going into our management zones and pushing the best acres as far as we can. We haven’t pushed them as far as we can yet, and that’s the goal for the future. It’s to push everything we can in order to get the best ROI and try to do the best job that we can.

DALE MEYER: Before that, we were doing zone management for fertility by soil type. I mean, there was soil sampling, but it was, more or less, by the lay of the land and soil type. With the local co-op, we went to larger five-to-seven acre grids. They would spread it by areas, more or less, not necessarily by GPS but by a map.

Farm data for ROI

MIKE MYERS: Our precision ag and farm data was pretty rustic, overall. You just kind of guess where you were in the field. The biggest thing that helped us change was implementing yield data. As soon as we started picking that up, we needed something to do with it. Otherwise, what’s the point of getting it? Peter did a talk with Latham that made a lot of sense to us, that we could compile the yield data with our fertility, soil sampling, soil types, etc. And the biggest thing that he’s helped us with is to realize where we’re lacking, where we’re putting too much fertilizer on. I mean, it’s not a coincidence that our best yields have been over the past few years using SciMax’s precision ag tools. Now, you have to have the weather to do that, but without SciMax’s help, we wouldn’t have averaged 240 as a farm average last year on corn. It probably would have been 210, 220, like your average farmer in the area would have been. But with us doing the extra things and managing better with their help, we were able to get more return. More or less, we’re not at the beginning of this, but we’re starting to take the steps that’ll start pushing us even higher, I think. It’s not something in that we implemented everything right away, but we’re implementing some things more and more every year. We’re trying to build our soils on fertility-level more this year than we have in the past. And looking at the farm data he gave us today, I mean, if we continue the trend of what the farm data is saying, then that should pay off. Peter’s a really good guy to work with, too. There are other people that offer precision ag or something like it, but Peter’s the thing that kind of puts that all together, as far as SciMax marrying with Premier Crop and then bringing that to us. If he was a different person, I don’t know if we’d still be with them or not. I don’t know, but he’s keeping us for sure.

DALE MEYER: I think it’s safe to say that the majority of the farmers of my generation operated on a status quo thing up to a point. Then, the yield monitors came in to where we could see: “Oh, wow. I never realized that the wet spot was affected so much by the excess water.” So, a lot of tiling has happened because of that, and then, also, the fertility side with different soil types. In parts of the field that are high yielding, we were pulling a lot more nutrients off than we thought. I guess, maybe, we just didn’t even think. Precision ag kind of sharpened everything because you didn’t really know the advent of the yield monitor, as well as grid sampling and other things. Hybrids have improved, there’s no question about that, but, all in all, we’re doing a better job. We’re doing a better job of planting, as far as placement, depth and spacing, but particularly depth, or emergence at the same time. It’s easy for the seed companies to take a lot of credit, and they deserve a lot of credit, but the farm equipment’s and farm data management changed this picture a lot, too.

PETER BIXEL: Well, I think, studying the hybrids and placing them where they need to go makes a big difference, too. Before, maybe, if you were my partner, you just buy: “Yep, these three are good.” The dealer sold them to him. Where did you plant them? “It didn’t matter. You just plant them wherever you want.” No, there is a difference. You know that, Michael.

MIKE MYERS: Yeah, I guess for me, as far as all this, it’s all that I mentioned a little bit. Getting yield maps gives you a picture of what happened that year, and then making that into managing the zones, that shows us what has happened over many years. I mean we have a memory, but we don’t have a the farm data memory where we can go back and say: “Okay, this area of the field did this, and, on average, it’s kind of been a B area. Or it’s a C area or an A.” We can break that down, and then we can also look at the fact, and I mentioned it too, as far as fertilizer, where: “Okay, what did the field make? Did it do 200? Okay, we’ll put a flat rate of crop removal of 200 across the whole field.” Well, that’s not the truth. The truth is that the poor areas did 160, the medium areas did 200 and the high areas did 240. I mean, it varies, right? But that’s kind of the idea. I, over the past several years, have really been putting a lot of thought to the fact that I would really like to see what our yields would be today if we would’ve started doing precision ag and variable-rate fertilizer five years ago because what we’ve been doing is taking off 240-bushel corn on a good area and putting 200 bushels of nutrients back on. So, we’re stealing away from our good areas and adding to our poor areas. In those poor areas, you’re never going to yield what the good areas are going to do. So, we can better utilize our money as far as our investment into fertilizer, and then that should pay dividends in ROI and harvest time, too. That’s one of the biggest things, I would say.

PETER BIXEL: Their retailer in the past wasn’t able to really do the field history either, so now they’ve made a big change and adjusted things. Including adding strip-till.

 

CREATING NEW MANAGEMENT PRACTICES FROM FARM DATA

PETER BIXEL: We’ve come up with tissue sample ranges by stage for corn and soybeans on each nutrient. So, this is that line, and then, basically, it’s just the group average zone, all we did overall here. You’ll get yours with this graph, and then we’ll always plot their individual data on here. It’s kind of interesting. I mean, we’re pretty close to the limit. We tracked pretty close on nitrogen. Really, we weren’t that far off comparatively.

MIKE MYERS: I’d like to see the guys that did the KTS. Can we group that data and look at it?

PETER BIXEL: Yeah.

MIKE MYERS: Our application was right at V5, V6. So, we gained more stalk, but where is manganese?

PETER BIXEL: Right here. (pointing to the field map on the computer)

MIKE MYERS: My manganese went through the roof, like right in there. I put it in with the KTS. Then I put that Versa Max, and that’s got manganese in it, and I took my manganese levels from like 80 to 100 clear up into 140s, and they stuck around until probably V10. I graphed it all out myself. Let me grab it. I think I got a pamphlet right here.

Using precision ag to look at tissue sample data

TISSUE SAMPLING

PETER BIXEL: Well, we’re trying to define trends for just seeing what the plants are telling us. It’s no different than a blood test, which you could say: “Well, that’s overkill.” Yeah, but the plants, the weather and everything change so much every stage, depending on the growing season. Like there in the middle of May, we didn’t hardly gain any GDUs for like two or three weeks because it was just cloudy and cool. Then, we took off, and we were growing like two stages from V4 to V6 in five days. The nutrients change by that stage. It’s kind of a way to gauge where the plants are at. Michael’s been pulling two different farms, and you pull in an A zone and just kind of track and see what they’re telling us. Not everybody, but the majority of us, will go, and apply what we feel the plant needs. Then, like he’s looking now to see: “Okay, if we applied zinc and manganese right before this tissue sample, and we applied it and we came back a week later, did we see the uptake?” Did the plant tell us they got it? Like my zinc and manganese, I think it took like about two weeks, two sampling times, for it to really uptake. For my potassium, I’ve got to look back. I can’t remember this off the top of my head. I think it took about three weeks because potassium is mobile. It takes water to get it down the soil. We didn’t have a whole lot of moisture, obviously, but Michael and I Y-dropped to put it next to the row so it would hopefully get in faster.

MIKE MYERS: Yeah, I just remember on the home farm, on the treatment out here, that the manganese just went through the roof. So, I know I can raise those loads.

PETER BIXEL: Manganese has been one that we’ve kind of struggled with, especially later on, but this year. I think some of it was due to the dryness, too. We didn’t have as much water as the last two years. So, it wasn’t flushing it through this profile. We were able to keep reasonable. The black line is where we want to be at, and you can see that. You got the polynomial or you got just the average of the polynomial for our group, and so we were able to stay a little bit better on that. The other thing, to me, that was pretty interesting was how boron’s been. If you look at the past years, we’ve been just horrible. We just tanked on boron. We would never come back up to where we’d like to be at but this year. Some of this, too, I believe, is we’re getting a lot more guys that are throwing boron in with their fungicide. Not everything, but some of that’s been helping bring those levels, I feel as a group, at least, up. We stayed pretty good, and the reason I think we stayed good on boron is that it’s mobile. We didn’t have rain. We didn’t continuously keep flushing that deeper and deeper in the profile. I think we’ll talk and see what everybody thinks next week. We can quit at like V10, V12, just because nobody’s been significantly doing anything different after that point.

PETER BIXEL: I know it would have because look at what you did last year. So, Michael and Dale, they’ve been doing some different stuff last year. It definitely showed, I think, good stuff for all your treatment, boron and zinc already, and things like that. I guess it kind of tells me they weren’t, I wouldn’t say, normal conditions. They had more rain than you but not normal. I guess that just tells me that we’re still going to keep playing, but we also learned our normal standard practices. It’s probably still a benefit if you’ve got that one limiting factor, whatever that is. It’s potassium in their case. He said it was like 130 to 140 parts per million. Spend the money on it. Get the foundation built. Then, you can start to worry about wider operation or extra phosphorus.

MIKE MYERS: It just goes back to that. Every time we plant a seed, it’s got its maximum potential, and as the season goes on, that lowers, lowers and lowers. Well, with potassium, and I’ve thought about this a decent amount, it’s more important than about every of the other major ones earlier. Maybe phosphorus is there, too, but as far as potassium, most of its uptake is V6 to 12-ish. Phosphorus, sulfur and, obviously, nitrogen are all after that. So, which of the four biggest nutrients is going to pull our potential down the most in that first, until V8? Well, it’s probably potassium. So, if we don’t have potassium there, that potential is already capped.

PETER BIXEL: Correct. You can put on as much nitrogen as you want if you think it’s efficient, like you said. After that fact, it doesn’t matter because K has got to be there to move it up in the plant. When you grid sampled and then started doing the strip, I think it’s good, especially with what we’re doing and trying to build the 250 and stuff that we’re doing on the farms and using the management zones. I’m trying to continue to build that. On your beans this year, with new soil sample data, which is not the best year in yields and stuff like that, you were at 144 parts per million of potassium, and you went to 176. Pretty steady increase and a direct correlation. We saw that, yeah, you went from 27 bushels to 57, a 30-bushel acre advantage.

MIKE MYERS: On just a 30 parts per million difference.

PETER BIXEL: Correct. So, I think as we sample some other farms — I don’t think everything got sampled. I can’t remember the majority of stuff, but as we get the new stuff on the rest of the farms, it’ll be interesting to see. That was something I pointed out where, like you said, potassium, and we see this with a lot of clients, at 22 to 26. Not really a huge correlation.

CORN ON CORN FARM DATA

MIKE MYERS: I was really impressed with how I did this fall corn on corn over here, and we vertical tilled at first. Well, we did that, so we could put anhydrous on.

PETER BIXEL: How deep did you do the vertical till?

DALE MEYER: Through May, three to four inches.

PETER BIXEL: How deep was the strip-till in?

MIKE MYERS: About four to five. It can go six, just depends.

PETER BIXEL: That’s why I don’t think our lows aren’t as low. Maybe that’s some of the genetics or fertility, things like that, too.

MIKE MYERS: We’ve mentioned we have more potential on all of our corn going into July, except our corn-on-corn. It’s awful. Yeah, there’s a pond right there.

PETER BIXEL: Our corn-on-corn, for the group, averaged 165. Our first-year corn was 190. So, that tells you that we haven’t seen that big of a spread between those two for a lot of years.

DALE MEYER: We’ve not had this consistent-looking crop at harvest time on corn-on-corn ever, that I can remember.

MIKE MYERS: As far as spacing and the beans being there.

DALE MEYER: We had a good growing season, but that all started when it came up.

PETER BIXEL: Well, we didn’t have a lot of wet feet in great conditions, like you said, to come out on soil. You only had nine inches. With the weather Premier grabs, nine inches of rain is all I had. This area is definitely the lowest.

MIKE MYERS: Probably over half of that came before July 1st.

PETER BIXEL: It came before June. He keeps track of some calendars. He’d have every rainfall.

DALE MEYER: The people that run the auction over here at Guthrie Center, what did he tell him?

MIKE MYERS: He was worse yet. What was it?

DALE MEYER: They only had a couple of inches all summer.

MIKE MYERS: We had about an inch, an inch and a quarter in July, and then about the same in June. They didn’t even get an inch in either of them.

 

Make sure to listen to the Premier Podcast, where everything agronomic is economic. Please subscribe, rate and review this podcast so we can continue to provide the best precision ag and analytic results for you. And to learn more about Premier Crop, visit our blog at premiercrop.com.

Yield Efficiency at a Year-End Grower Meeting with SciMax Solutions

“I think people are really good looking at a 10,000-foot view, but when you dive deeper into the economics and profitability, that’s where the rubber meets the road.”
– Landon Aldinger, Farmer, Iowa Falls, IA

PETER BIXEL: Good afternoon. My name is Peter Bixel with SciMax Solutions, and today we’re north of Iowa Falls and visiting with a client of ours, Landon Aldinger.

LANDON ALDINGER: Hello. This is Landon Aldinger. I farm around the Iowa Falls area with my father Mike Aldinger. I am a fourth-generation farmer in our family. We currently run a row crop operation. We have some beef cattle, some hog operations and also have a sales and consulting business here in town called Precision Farm Management.

KATIE DECKER: Tell me a little bit about how you got started with SciMax and why you started working with Peter.

LANDON ALDINGER: Yeah, so I would have met Peter through my father, who, I believe, the connection point was through Latham, correct? Yeah, Latham Hi-Tech Seeds offered a service that was called seed to soil. My brother-in-law Randy and myself and my dad and my dad’s Latham RSM kind of introduced us. Dad was actively working with SciMax at the time through Latham, like I said, but we’ve kind of grown our relationship together over the years, adding various products.

KATIE DECKER: Do you still farm with your father?

LANDON ALDINGER: Yeah. We have a full corn and soybean farm. We have a few fat cattle here up at my place. We own some hog buildings that we do odds and ends with. And then we have a sales and consulting business, where we sell a full retail line of herbicides, fungicides, insecticides, any crop protection products, and then also sell Latham Hi-Tech Seeds and Wyffels Hybrids.

DSC_2089

KATIE DECKER: Talk through how you guys work together.

LANDON ALDINGER: I call Peter and then he doesn’t call me back. No, I’m just kidding. I’m kidding.

PETER BIXEL: It was that way.

LANDON ALDINGER: No, it’s the other way around, usually. I use all the folks at SciMax to assist in creating that crop plan for the year, obviously. Planning from seed placement, a variable-rate nitrogen piece, our variable-rate seeding rates, just pulling all that data together and maximizing our potential profitability and efficiencies. Then, we get to this time of year, where we’re looking backwards and kind of addressing: “How did we do in analyzing that?” The analytical side is why I enjoy the relationship. It’s easy to go out and just pick corn and say: “I got 200 bushel, or whatever you got, and that’s great.” But what did you do to dictate that outcome?

KATIE DECKER: Do you have an instance of a problem you guys were faced with, and then once you started working with SciMax, how they helped you overcome that?

LANDON ALDINGER: Yes, my grandpa actually owned the fertilizer plant.

PETER BIXEL: They had a fertilizer plant, so their fertility levels were really good. As they’ve been pulling off more yield, it just helps Landon now that we’ve been watching the fertility levels by the yield that they’ve been achieving and just being cognizant of what those levels are and how to address them, using the tools to basically fix or continue to keep them where t

hey’re at. They’ve done a lot of litter. A lot of chicken litter too, as well, to help source a lot of that stuff, and then the hog manure that Landon mentioned. So I’d say just really concentrate on those fertility levels to make sure to keep them up because that’s the thing that I think helped Landon’s grandpa, dad and then him, just having that good base. That foundation has really helped set the operation up for success.

KATIE DECKER: How does SciMax really help you get the most out of the data that you’re collecting?

LANDON ALDINGER: Like I said, I think in any system there isn’t always just one variable for success that you can tweak or fine-tune. It’s taking a part of the entire system, what your manure management practices are, what your fertility levels are that he’s talking about, how you’re placing the seed, where you’re placing the seed at what rates. Same with nitrogen. And I think the ability to dive into each one of those segments of that system and analyze this worked with this other combination but didn’t work so well over here, you almost get a blueprint for going forward. I think, as we’ve seen hybrids evolve or their genetics evolve over time, we can really start to tailor-make it to the hybrids. That’s where I see the biggest focus for me, I guess, being a seed dealer, and I carry that onto my customers, too.

PETER BIXEL: Yeah, I think that’s helped Landon, knowing his hybrids inside and then just kind of putting out the practice on his own acres and then seeing: “Okay, if we push it to 38 or 40,000 or something, does it pay?” Maybe it doesn’t because, again, back to the good fertility, everything else is set. So, now if you change that one variable, did it pay? And he can take that to others to help their operation if they’re similar.

LANDON ALDINGER: Or a combination of variables, too. Sometimes that data gets lost in the noise, and it’s hard to kind of separate it out and see. So, I think their services have helped us that way immensely.

PETER BIXEL: This year has just been a challenge because you don’t have Ethan and Tyson going through, each one of them, individually. Two people at Premier go through it all, and I know they have a lot. They go through each one, verify and then, if there’s a question, they send it to their in-house statistician. Then, they send those out, so it’s been taking like a month to get those reports back.

LANDON ALDINGER: Yeah. Well, there’s a lot of stuff in there.

PETER BIXEL: Yeah, we just did it on population this year. That’s all that we looked at. We had two farms. Leto’s and Bradford, I think, were the two that we did.

KATIE DECKER: Can we talk a little bit more? Just go a little deeper into the decision making. How is Peter helping you make those decisions, both agronomically and economically, on your operation?

LANDON ALDINGER: I come from an angle of the seed perspective, being a seed salesman. I want to know everything I can about every hybrid and where it likes to live and how it likes to operate. We’ve done a lot. I think, probably, the bulk of the work that we’ve done with you is the variable-rate planting populations; that and the nitrogen piece for ourselves and customers. I mean, how many times do I call you and just on random stuff, too?

PETER BIXEL: Well, yeah, it’s not necessarily just about, I mean, from fungicide recommendations to product things. I don’t know. I’m just thinking out loud here, but just anything in general. What do I use in my operation? I’ll tell him what I use, but it doesn’t mean he has to or, by any means, needs to. It’s just good, I think. It’s the same way back from him to me, not just me to him. It’s just a sound barrier or somebody to talk through things with and see if your plan or if your strategy makes sense.

LANDON ALDINGER: I think maybe more than one key aspect of that data-driven decision is just forcing operators to think in those terms: doing trials and setting them up and comparing products. I’m looking at two fungicides right behind you, and we had head-to-heads out there, and we learned. I mean, we’re going to look at the data, but I can look at it just visually and see that there was a difference. I think people are really good at just doing the visual 10,000-foot view, but you really have to dive into it and then start doing the whole, from the economics and the profitability side, which is where it really comes down to rubber meets the road.

KATIE DECKER: Can you tell me a little bit more about the trials that you’ve been doing? You don’t have to give me any specifics on certain products or varieties or anything, but maybe why you decided to do the trial and some things that you’ve learned.

LANDON ALDINGER: I’m just thinking in terms of this last year because we probably had a little bit more, but there’s always the fungicide head-to-head. There are always new products, comparing them to old standards and then running the cost analysis of how they compare versus yield. Standard stuff. Varieties. We do a lot of head-to-head populations within those varieties. At Leto’s, we had the high-yielding stuff.

FBscimaxpeterandlandon

PETER BIXEL: Landon was tissue sampling every week and then, basically, had a plan put together of what to apply and when. It’s different from what he was doing on other acres to see if he could push it or what we’d see.

LANDON ALDINGER: Correct.

KATIE DECKER: What do you think is the value of working with Peter and SciMax, in general? Why would you work with them over a competitor or someone else?

LANDON ALDINGER: Right now, I would put it mainly on trust. We talk, probably, I don’t even know how often but quite often. He’s just a trusted advisor, and I don’t really like that term, but it is. I know I’m getting the honest truth when I call him and he gives me his recommendation. And if it’s something different than what I see, then we try to dive into: “Why are my results different than what your results are?” But I think there’s just a trust factor right now, and that’s why we’ve continued to partner with them for the long term.

Please subscribe, rate and review this podcast so we can continue to provide the best precision ag and analytic results for you.

3 Ways to Start Utilizing Your Data

Technology is great… when it works like it’s supposed to. Whether it’s your cell phone, computer or agriculture equipment, we’ve all had our fair share of battles with technology. Like it or not, technology isn’t going away. In fact, it’s going to continue to grow and become even more prevalent in our lives, even in agriculture. We see this every year in agriculture as we continue to add technology to our planters and combines. Monitors continue to become more complex, and tractors are driving themselves. So, where do we go from here?

Here are three ways you can get on board with technology and start utilizing your data to make decisions.

3 ways to utilize farm data

GO BEYOND YIELD

When determining the success of a growing season in farming, yield is one of the first things we refer to. Higher yields equal more bushels, and more bushels equal more money. But what does it take to achieve those higher yields?

For instance, in order to gain a 5% yield increase, you’ll have to increase your input costs by 10%. Is that worth it? Tying input costs to yield is a great way to utilize your on-farm data. Breaking down your total cost per bushel (break-even selling price) is a great place to start when determining profitability in your fields. Take it one step further and break down your break-even price spatially by Management Zone, which allows you to really zone in on different areas of each field to reach your greatest return on investment.

As you can see in the graphic above, at Premier Crop we pride ourselves on diving deeper than the competition and gathering all the information to give you a very detailed report so you can visually see, in each management zone, in each part of your field, how you profit. This helps you make better management decisions using your data.

MANAGE VARIABILITY USING DATA 

Every field has variability. Don’t believe me? Look at your yield maps from the last 5 years. More than likely, those maps are not one consistent color, and discarding years of weather damage, the maps are fairly consistent through each year. Using historical yield data to identify areas of your field that are consistently underperforming or over performing is a great way to make use of your data. Some areas of your fields are going to produce differently than others.

At Premier Crop, we start with your historical yield data, putting it together to achieve a relative yield map of all years of yield data for that specific field. This allows us to find areas of the field that are constantly performing above or below the field average. The next step is to determine the limiting factor (or factors) in that area. For underperforming areas, is it something that can be fixed with nutrients, tile, etc.? Or maybe it’s a sandy area that no matter how much nutrients we pump into it, it will always underachieve. For a higher yielding area of the field, the question becomes ‘how hard can we push that area to continue to increase yield while still maximizing our return on investment?’ Once we establish your zones, Learning Blocks are a great way to prove what the best rates are for each zone. This determines more confidence in your management decisions year after year.

RUN TRIALS IN YOUR FIELD

We have been running on-farm trials for many years at Premier Crop. We use Learning Blocks to test input rates and seeding populations using a prescription and technology. It’s important to note that there is so much variability across every field, therefore different rates work better in specific parts of your field. One way to prove the best profitable rate or population is to trial by blocks instead of strips. By using a Learning Block, we can strategically place a trial in one zone and compare the results of that block to the immediate surrounding area of the same zone, giving us an accurate result.

Learning Block Example

In the example above we tested two different hybrids to see if lowering the population would be beneficial not only by yield, but economics too. You can see that Hybrid 1, tested a lower population by 1,080 seeds/ac and created a +3.4bu/ac with a profit of $18.91/ac. And lowering Hybrid 2 by 1,009 seeds/ac created a profit loss of -8.4/bu and -$34.39/ac. Therefore, the grower can make an informed decision on this specific management zone in his field that Hybrid 1, at a lower seeding population of 36,078 will help him profit in this zone.

Learning Block Winner-02

At Premier Crop, in addition to the yield results, we tie the economics to the trial to determine the profitability of making that change. This leads to more confident decisions and more profitability on every acre.

________________________________________________________________________________

Technology can be complicated and frustrating, especially during the busy seasons. The last thing you want to do during planting is stumble through the monitor trying to load a planting prescription. This is where Premier Crop can help. We focus on the data so that you can focus on farming. We handle all of the button clicks and data organization, so when the time comes, you are able to farm without having to worry about setting up your monitor or capturing good data. At the end of the year, we compile all of the data we have collected on your farm, create reports, and meet with you. Together, we take a look at areas that did really well, as well as areas we could change for the next growing season in order to continuously maximize your profit.

As technology continues to evolve, there will be more and more opportunities to utilize our on-farm data. At Premier Crop we continue to monitor the technology changes in agriculture year after year, and help you adopt and adapt to these changes in your operation. Contact us now to get in touch with an advisor in your area.

farm efficiency